BASF A3EG6 PA66 | GF30 reinforced

Densidade: 1,14 g/cm³

Absorção de água: 2,5%

Embalagem: 25KG/Saco

Processo: Moldagem por injeção

send contact

PA66 1300S é um material de nylon 66 de alto desempenho produzido pela Asahi Kasei Co., Ltd., projetado para atender às necessidades de uma variedade de aplicações exigentes. O material possui excelente alta rigidez, alta resistência e alta tenacidade, e exibe excelente alta fluidez e boas propriedades de aparência durante o processamento. O PA66 1300S adiciona lubrificantes e agentes desmoldantes para melhorar ainda mais sua lubrificação externa e capacidades de prototipagem rápida, fazendo com que tenha um bom desempenho em moldes complexos e produção de alto volume. Além disso, o material possui boa processabilidade e é adequado para diversos processos de moldagem, garantindo que o produto final tenha excelente qualidade e durabilidade. Amplamente utilizado nos seguintes campos:
Campo automotivo: Adequado para peças internas automotivas, fivelas, conectores e diversas peças automotivas, proporcionando resistência estrutural confiável e durabilidade.
Aplicações eletrônicas e elétricas: usadas em blocos terminais, bobinas, conectores e outros componentes importantes para garantir desempenho elétrico eficiente e segurança.
Aplicações industriais: Adequado para peças mecânicas, engrenagens, peças estruturais, etc. para garantir confiabilidade em ambientes agressivos.
Bens de consumo e equipamentos esportivos: Ideal para utensílios de cozinha, carrinhos de bebê, artigos esportivos, braçadeiras, produtos de banheiro e muito mais, proporcionando aparência superior e vida útil duradoura.
Aplicações em vestuário e esportes ao ar livre: Em acessórios de vestuário e equipamentos para esportes ao ar livre, a alta resistência e boa processabilidade do PA66 1300S garantem a funcionalidade e o conforto dos produtos.

IMPORTANT NOTICE FOR USE IN PROCESSING:

1, product storage products to maintain the integrity of the package stored in room temperature, dry indoor warehouse, and should not be subjected to direct sunlight; the product has no expiry date, it is recommended that the use of 2 years, after opening the package should be used immediately.
2, the use of the requirements of the product should be fully dry before use, it is recommended to use 180 ~ 160 ℃ hot air drying 4-6 hours, dew point ≤ -40 ℃, melting temperature of 280-300 ℃.

Key Attributes

Leona™ PA66 1300S
Product information
Manufacturer		Asahi Kasei Corporation
Part Marking Code		>PA66<
Color		NC
Material Shape		Pellets
Process		Injection molding
FR		V-2
specification		UL
Features		Good appearance High flow High stiffness High strength High toughness Rapid moldability External lubrication Good processability
Application		Automotive Interior Trim Automotive applications Automotive parts Office Applications Fasteners Outdoor Cactivities Applications Coil skeleton Connector E & E Applications Terminal block Toys applications Home Appliances Applications Fittings Gears Housing Industrial Applications Machinery parts Luggage Baby carriage Kitchen Appliances Applications Spatula Sports goods Applications Sports equipment Applications Bathroom Applications Consumer applications Structural Parts Cable ties Costumes application
Additives		Lubricant Mold Releases
UL File NO.		E48285
Physical property	Standard	Value		Unit
Density	ASTM D792	1.14		g/cm³
Density	ISO 1183	1.14		g/cm³
Shrinkage Flow	INTERNAL ETHOD	1.3-2.0		%
Water Absorption 23°C Saturation	ISO 62	2.5		%
WaterAbsorption 23°C 50RH Equilibrium	ISO 62	2.5		%
Hardness	Standard	Value	Wet		Unit
Rockwell Hardness M(Scale)	ISO 2039	80	55
Rockwell Hardness R(Scale)	ASTM D785	120	108
Mechanical behavior	Standard	Value	Wet		Unit
Tensile Modulus 23°C	ISO 527	3000	1200		MPa
Tensile Strength Yield 23°C	ISO 527	82	52		MPa
Tensile Strength	ASTM D638	79	57		MPa
Elongation Yield 23°C	ISO 527	4	24		%
Elongation Break	ASTM D638	50	250		%
Elongation Break 23°C	ISO 527		100		%
Flexural Strength	ASTM D790	118	54		MPa
Flexural Strength 23°C	ISO 178	113	42		MPa
Flexural Modulus	ASTM D790	2800	1200		MPa
Flexural Modulus 23°C	ISO 178	2700	1100		MPa
Izod Notch Impact	ASTM D256	3.9	150		J/m
Charpy Notch Impact	ISO 179	6	15		kJ/m²
Charpy Un-notch Impact	ISO 179	NB	NB		kJ/m²
Tabor Wear 1000 Cycles	ASTM D1044		7		mg
Thermal	Standard	Value		Unit
HDT Unannealed 0.45MPa	ASTM D648	230		°C
HDT Unannealed 0.45MPa	ISO 75	190		°C
HDT Unannealed 1.8MPa	ASTM D648	70		°C
HDT Unannealed 1.8MPa	ISO 75	70		°C
CLE Flow	ASTM D696	8E-5		cm/cm/°C
Heat Conductivity Coefficient		0.2		W/(m·K)
Specific Heat		1670		J/(kg·°C)
Electrical properties	Standard	Value		Unit
Volume Resistivity	ASTM D257	1E14		Ω.cm
Volume Resistivity 23°C	IEC 60093	1E14		Ω.cm
Surface Resistivity	ASTM D257	1E13		Ω
Surface Resistivity	IEC 60093	1E13		Ω
Dielectric Strength	ASTM D149	20		KV/mm
Dielectric Strength	IEC 60243	20		KV/mm
CTI 3.0mm	IEC 60112	600		V
Flammability	Standard	Value		Unit
GWFI 3.0mm	1EC60695	960		°C
Flame Rating NC 0.40mm	UL94	V-2
Flame Rating All Color 0.71mm	UL94	V-2
Flame Rating All Color 1.5mm	UL94	V-2
Flame Rating All Color3.0mm	UL94	V-2
Limiting Oxygen Index	ASTM D2863	26		%
UL	Standard	Value		Unit
UL FlameRating NC 0.40mm	UL94	V-2
UL FlameRating ALL0.71mm	UL94	V-2
HWI ALL 0.71mm	UL746A	4		PLC
HAl ALL 0.71mm	UL746A	0		PLC
RTI Elec ALL0.71mm	UL 746B	105		°C
RTI Imp ALL0.71mm	UL 746B	75		°C
RTI Str ALL0.71mm	UL 746B	85		°C
UL FlameRating ALL 1.5mm	UL94	V-2
HWI ALL 1.5mm	UL746A	4		PLC
HAl ALL 1.5mm	UL746A	0		PLC
RTI Elec ALL1.5mm	UL 746B	105		°C
RT1 Imp ALL1.5mm	UL 746B	75		°C
RTI Str ALL 1.5mm	UL 746B	85		°C
UL FlameRating ALL 3.0mm	UL94	V-2
HWI ALL 3.0mm	UL746A	3		PLC
HAI ALL 3.0mm	UL746A	0		PLC
RTI Elec ALL 3.0mm	UL 746B	105		°C
RTI Imp ALL 3.0mm	UL 746B	75		°C
RTI Str ALL 3.0mm	UL 746B	85		°C
Comparative Tracking Index	IEC 60112	0		PLC
HVTR	UL 746A	0		PLC
Dimensional Stability	UL746	0		%
Arc Resistance	ASTM D495	6		PLC

Company Profile

Luoyang Baiyou Import and Export Trade Co., Ltd., located in Luoyang City, Henan Province, is a company integrating production, processing, sales and trade. As a wholly-owned subsidiary of Luoyang Qiangsheng Industrial Co., Ltd., we mainly export PP, PE, EVA, ABS, PS, PET plastic raw material granules, which are used in making FIBC bags, office equipment, home appliances, auto parts, agricultural products, pipes and other fields.

Established in 1986, Luoyang Qiangsheng Industrial Co., Ltd., covers an area of more than 260,000 square meters, with total assets of 420 million CNY and an annual output value of 1.5 billion CNY. Deeply cooperated with national oil refineries and coal mines for more than 30 years, Qiangsheng Group has a keen insight into the market and strong financial advantages, not only provides Baiyou with competitive prices, but also ensures timely delivery.

Partners

We have established long-term relationships with 80+ well-known companies around the world