Vestapeek L4000G PEEK

Process: Injection Molding/ Extrusion molding

Packing: 25KG/Bag

Get Quotation

Evonik Vestapeek L4000G PEEK pellet Description

Evonik Vestapeek L4000G is a high viscosity, non enhanced lubricating grade PEEK material suitable for injection molding and basic molding processing. It has high mechanical strength, excellent heat resistance and chemical resistance, and is widely used in engineering plastics applications.

VESTAPEAK® (VESTAKEEP®) is the brand name of a series of high-performance polymer materials produced by German chemical giant Evonik, mainly referring to the polyetheretherketone (PEEK) series of products. The company is the world's third largest supplier of PEEK materials, with an annual output of more than 1,000 tons of polyetheretherketone.

Evonik Vestapeek L4000G PEEK pellet Advantage

Better mechanical strength. Compared with conventional resin materials, the flexural modulus of Vestapeek L4000G PEEK material reaches 3600MPa, which is much higher than conventional materials. It is suitable for applications with strict requirements on product hardness and impact resistance.
Good lubrication performance. Vestapeek L4000G is added with lubricant ingredients to improve the feeding process, while also improving production efficiency and the self-lubricating performance of the final product.
Excellent high temperature resistance. Vestapeek L4000G PEEK material can maintain good mechanical properties when used in high temperature environments above 150°C. The load deformation temperature under the 0.45MPa test environment reaches 205°C, which has great advantages in applications in extreme high temperature environments.

Why choose Baiyou as Evonik Vestapeek L4000G PEEK pellets supplier?

Leading Polyetheretherketone supplier (PEEK resin) , 20+ years of experience in plastic product manufacturing and chemical raw material import and export
Fastest Arrival, with warehouses in multiple ports
1,000+ types of resins are available, and we have cooperated with large petrochemical groups for 30+ years
Free Samples for production testing
Wholesale price, even a piece of goods is based on the wholesale price

Key Attributes

Product information
Evonik Vestapeek L4000G PEEK
Manufacturer		Evonik
Part Marking Code		>PEEK material<
Material Shape		PEEK pellets
Process		Injection molding PEEK material Extrusion molding PEEK material
Material Attribute		Lubricated
Physical property	Standard	Value	Unit
Density	ISO 1183	1.30	g/cm³
Humidity absorption	ISO 62	0.3	%
Water absorption	ISO 62	0.5	%
Melt volume flow rate, MVR	ISO 1133	12	cm³/10min
Temperatrue		380	℃
Load		5	kg
Molding shrinkage, parallel	ISO 294-4，2577	0.9	%
Molding shrinkage, noramal	ISO 294-4，2577	1.1	%
Thermal conductivtiy of melt		0.18	W/(m·K)
Spec. heat capacity of melt		2110	J/(kg·K)
Mechanical behavior	Standard	Value	Unit
Tensile modulus	ISO 527	3600	MPa
Yield stress	ISO 527	94	MPa
Yield strain	ISO 527	5	%
Nominal strain at break	ISO 527	30	%
Charpy impact strength, +23℃	ISO 179/1eU	N	kJ/㎡
Charpy impact strength, -30℃	ISO 179/1eU	N	kJ/㎡
Charpy notched impact strength,+23℃	ISO 179/1eU	7	kJ/㎡
Type of failure		C
Charpy notched impact strength,-30℃	ISO 179/1eU	6	kJ/㎡
Type of failure		C
Thermal	Standard	Value	Unit
Melting temperature, 10℃/min	ISO 11357-1/-3	340	℃
Temp. of deflection under load, 1.80MPa	ISO 75-1/-2	155	℃
Temp. of deflection under load, 0.45MPa	ISO 75-1/-2	205	℃
Vicat softening temperature,B	ISO 306	305	℃
Coeff. of linear therm. expansion, parallel	ISO 11359-1/-2	60	E-6/K
Burning Behav. at 1.5mm nom. thickn.	IEC 60695-11-10	V-0	calss
Thickness tested		1.6	mm
Yellow card available		yes
Oxygen index	ISO 4589-1/-2	38	%
Electrical properties	Standard	Value	Unit
Relative permittivity,100Hz	IEC 62631-2-1	2.8
Relative permittivity,1MHz	IEC 62631-2-1	2.8
Dissipation factor, 1MHz	IEC 62631-2-1	50	E-4
Volume resistivity	IEC 62631-3-1	>1E13	Ohm*m
Surface resistivity	IEC 62631-3-2	1E15	Ohm
Comparative tracking index	IEC 60112	200
Test specimen production	Standard	Value	Unit
Injection molding, melt temperature	ISO 294	380	℃
Injection molding, mold temperature	ISO 294	V-0	℃
Injection molding, injection velocity	ISO 294	960	℃
Injection molding, pressure at hold	ISO 294	24	℃